+91 8080978282, +91 22 47489055

Hot Melt Bopp Labelling

Automatic Hot Melt Bopp Labelling Machine for Pet Bottles. Speed Range from 90 to 300 BPM

Wrap around Hotmeltlabeling machine is a high speed system ideal for round bottles. It is matched with R.F.C machine and the conveyor connecting both is synchronized to ensure smooth flow of bottles. A stainless steel star wheel or feed worm in case of high speed machines will take the bottle and place in front of the label application drum. The label is delivered by the sensor controls whose response time and control speed frequency of the electronic print mark registration system is very fast, and it works 20 times faster than any other Indian Hot melt label applicator. The bottle is rolled over the label and on completion of label application, bottle will be discharged on the out feed conveyor. The synchronizing/correction speed is 350 MHZ and response time is 120 micro-seconds. For lower capacity machines to save cost we have developed our own Hotmelt unit, but for higher speed machines we use a Nordson, (U.S.A) system.

Wrap Around Hotmelt Lebeller

  • All electronics used in our system are from leading suppliers such as Siemens, LG, Danfoss who have worldwide service support.
  • The electronic registration system is servo controlled and the fly cutter is synchronized to it to ensure that label is cut with ±1 mm of the print mark.
  • The label cutter is PLC controlled with a hardened tool steel blade.
  • There is an alarm when the label reel starts to run low.
  • If there is no bottle on conveyor, the label will not be delivered to the drum and if there is no label on the drum no adhesive is applied

SPECIFICATION

  • 60-150 BPM WRAP AROUND FEEDSCREW ROLL FED,  HOT MELT
  • ADHESIVE LABELLING MACHINE
  • Container Handling 
  • Production Counter  :Speed Indicator  
  • Label Handling: Electronic registration system with Alarm and PLC 
  • Label  Cutter : Low Reel Indication
  • Operator Console MOC

 PANASONIC Servo Controlled

  • PLC controlled with Hardened  tool  steel  blade Indicates when roll change is required.
  • By synchronized fly cutter
  • IP 55 grade of protection
  • GEFANUC  MAKE WITH SPECIAL CUT TO LENGTH CONTROL