Mineral Water Business

Shrink Sleeve Applicator

Shrink Sleeve Applicator
Conveyor and steam tunnel for an automatic shrink sleeve applicator that operates between 60 and 300 beats per minute
 

Sleeve Applicator

 
Machine applies sleeve to the bottle,can do half bottle sleeving or full bottle sleeving& even neck cap tamper proof sleeving the sleeve once inserted in the bottle can later be shrink by a steam tunnel which is coupled with this machin e speeds range from 60 to 300 BPM.
 
Printing finish to have 5 to 6 mm non printed clear material between two sleeves for photo eye detection or print mark of 5 x 8 mm dark Black. Cutting operation by pneumatic cutting to print registering. Sleeve to be pushed down upto level manually. For Setting different heights for different bottles & labels the co is very simple as the whole sleeve applicator head has up/dn. Automatic motion by means from a simple touch button in the MMI. Thus making the Bottle Sizes change over very quick and Easy. Sleeve delivery and print register with stepper motor and electronic control.
 

AUTOMATIC  SLEEVE APPLICATOR

  • Capacity: 100 to 300 Bottles per minute 
  • Cut  Material: Length  50 to 150 mm Width of lay flat 150 mm max
  • Container Height (mm): Max. 350
  • Container Diameter (mm): 50 to 100
Power Consumption:
  • Sleeve Delivery Motor: 2.250 KW 
  • Conveyor Drive:  1.125 KW 3.375 KW
  • Air Consumption: 2 CFM at 60-80 PSI
  • Sleeve Material: 35 to 80 Micron thick
  • Roll Diameter: 500 mm
  • Core Diameter: 76  to 100 mm
  • Overall Dimension of Machine: Width 750 mm Depth 750 mm Height 2200 mm
  • Conveyor length: 2500 mm
The printing finish should have a 5 x 8 mm dark black print mark or 5 to 6 mm of non-printed clear material in between two sleeves for photo-eye detection. Pneumatic cutting is used in this process to register the print. Manually pushing the sleeve down to the desired level.
 
The entire sleeve applicator head is up/down, making it very easy to set different heights for different bottles and labels. Automated movement via an easy-to-touch button on the MMI. Consequently, it is very simple and quick to switch between bottle sizes. Print register and sleeve delivery using an electronic control and stepper motor.

PANASONIC Servo Controlled

  • PLC controlled with Hardened  tool  steel  blade Indicates when roll change is required.
  • By synchronized fly cutter
  • IP 55 grade of protection
  • GEFANUC  MAKE WITH SPECIAL CUT TO LENGTH CONTROL